Tension
The pre-set programmed tension remains constant throughout the process. It
can be selected for every programme step and remains constant even when
reversing, and can be displayed on screen.
Speed The programmed speed remains constant and is independent of the load .
Speed for each step can be programmed as desired and displayed on screen.
Oscillation When the programme demands a stoppage or at the end of the final run, the
machine switches to an oscillating movement. Oscillation can be set
between 1 to 5 revolutions, always on the bigger batch side.
Re-Circulation Bath re-circulation with a stainless steel pump, to obtain uniform dyeing
and to improve chemical exchange, can be provided. On request a small
chemical addition tank can also be provided.
Dosing
Dye-stuff and chemical are added as programmed with the help of a dosing
system which can be controlled by a PLC.
Maxi-Jig Electronic MJE – 1400 is the most innovated machine for
preparation, pre-treatment and dyeing of fabric in open width.
The machine is completely manufactured from Stainless steel and is
suitable for all the processes where constant speed and tension of fabric
are absolutely required. The Maxi –jig Electronic MJE-1400 is suitable for
processing Cotton – Viscose-Silk –wool –Polyester, flax and its blends.
The Maxi-jig Electronic is equipped with individual motors controlled by
special frequency controller. Tension is adjustable between 25-250 gms./cm.
(linear). Maxi-jig. Electronic is equipped with a PLC /Micro Processor,
Re-circulating device and filter and is fully automatic.
Salient Features
Completely made of heavy gauge stainless steel quality AISI 316.
Water tight panoramic doors, Pneumatically operated.
Self supporting structure on Stainless Steel AISI 304 plates.
Stainless Steel Draw Rollers of strong construction made of AISI 316 pump.
Rocker arm in Stainless Steel with shift regulated by batch diameter.
Direct control of Tension through load-cells acting on Torque controlled
motors.
Trough also suitable for very small capacity for dyeing smaller lots.
Speed controlled through PLC/Micro processor up to 180 meters/minutes.
