Cylinder Drying Ranges are the simplest but amongst the
most important machines used in Textile Process House.
The cylinders can be installed in stacks of 6-8-10-12
cylinders and with one-two-three or more stacks to form a range.
High Speed Drying Ranges are usually provided with an
AC inverter controlled drive with a Flat Belt or a Chain and Sprocket
drive to the Individual cylinder.
Efficient condensate removal from the cylinders through
a well designed trapping system, coupled with dry saturated steam feeding,
ensures excellent performance of the Cylinder Drying range. SWASTIK
Cylinder Drying Ranges are equipped with Rotary joints of adequate size
for steam feeding and condensate removal (from both sides of the
wider-width ranges) and a specially designed TRAPPING SYSTEM with
individual traps for efficient removal of condensate water. This results
in highest operating efficiency.
Good mechanical design, coupled with maximum cylinder
surface utilization ensures lower energy consumption and higher
efficiency.
Salient Features
Suitable for drying all kinds of Fabrics.
Number of Cylinders as per production requirements.
Working Pressure and Temperature can be adjusted in
groups as may be desired for different temperature ranges.
Can be supplied with additional equipment for same
side drying.
Cooling Cylinders suitable for chilled water
circulation can be provided if required.
Can work in synchronisation with Pre-Treatment Range,
Continuous Dyeing Range, Merceriser, Washer or any other machine.
Equipped with two vacuum valves fixed 180° to prevent
collapse of cylinders.
For better performance, cylinders are equipped with a
drain valve to remove condensate before starting.
Optional Accessories
Teflon Coating on the cylinders.
Moisture Indicator of Controller acting on the steam
inlet to the stack.
Curved Bar Expander with Guide Roller or Three Curved
Bar Expander Assembly before the first stack.
Big Batching Device or Scray with Big Batching Device
for non-stop operation.
Steam feeding from both sides (mandatory for
wider-width ranges).
Steam line accessories for steam feeding and
condensate removal.
Individual drive to each stack instead of common
drive.
Mangle
The Cylinder dryers are usually supplied in tandem with a squeezing
Mangle. Different combinations of Mangles can be used for different
applications. Optionally, a vacuum extractor can also be offered for
specific requirements.
Technical Data
TECHNICAL DATA- MANGLE
Two Bowl Vertical
Top Roller 300 mm
Bottom Roller 300 mm
Two Bowl Inclined
Top Roller 310 mm
Bottom Roller 295 mm
Three Bowl Inclined
Top & Bottom Roller 310mm
Middle Roller 295 mm
Three Bowl Inclined Horizontal
Top & Bottom Roller 310mm
Middle Roller 295 mm
Trough Design
As per requirements
Mangle Power
3.7 kW - 11 kW
TECHNICAL DATA - DRYING CYLINDERS
Face Width on Cylinder
1300 - 3500
No. of Cylinders per Stack
6 - 8 -10 - 12
No. of Stacks
1 - 2 - 3 or more
Diameter of Cylinder
570 / 760 / 800 / 960 mm
Operating Pressure
4 bar - 6 bar
End Flanges
MS dished ends of suitable thickness
Cooling Cylinders
Stainless Steel jacketed construction for chilled water
circulation
Drive
Common Drive or Individual stack drive as desired.
Belt Drive or Chain and Sprocket Wheel Drive to individual
cylinders.
Power
2.2 - 3.6 kW per stack.
Speed Range
10 to 100 mtrs / min., with AC VFD (higher if desired)
